Mazda 6 dvd gps navigation Installlation process

Mazda 6 Navigation&Entertainment;button position of air exit with plastic crow plate,
Installation process. 1. The original audio system ofthen take it out by force. 15. Pry the four screws
of New Mazda 6 2.Use plastic crow plate to prywhich are fixed original audio system 16. Remove
the button position of the decorative plate 3. Hostoriginal audio system and unplug the wirings 17.
the decorative plate 4. The effect after removingThe effect after removing original audio system
decorative plate 5. Use plastic crow plate to pry18. Pry the 5x installation brackets of original audio
the decorative plates on both right & leftsystem 19. The five installation brackets of the
sides and note its button position, then removeoriginal vehicles 20. Fix the installation brackets to
the decorative plates 6. The effect afterthe new navigation system, and make sure the
removing right&left; sides decorative plates.direction is correct. 21. Connect all the back
7. Switch gear lever to N gear. 8. Pry thewirings&harness; of new navigation system
decoration on the console with plastic crow22. Install the navigation unit into the vehicle and
plate,please note each button position. 9. Take outfix the four screws 23. Install air exit components
the decoration of console by force, then unplug24. Install the air condition box and fix the four
the back wiring harness. 10. The effect afterscrews 25. Plug all wiring of console components
removing console decoration components 11.26. Install both right and left decorative plates, and
Remove the four screws which are fixed the airnote to each button position 27. Install the
condition box 12. Remove air condition box anddecorative plates, and note each button position
unplug wiring harness connected 13. The effect28.
after removing air condition box 14. Pry the