Mazda 6 Dvd Gps Navigation & Entertainment System Installation Process

mazda 6 dvd gps navigation & entertainmentcrow plate, then take it out by force.
system installation process15. Pry the four screws which are fixed original
1. The original audio system of of New Mazda 6audio system
2.Use plastic crow plate to pry the button position16.   Remove original audio system and unplug
of the decorative platethe wirings
3.  Host the decorative plate17.  The effect after removing original audio
4. The effect after removing decorative platesystem
5. Use plastic crow plate to pry the decorative18.   Pry the 5x installation brackets of original
plates on both right & left sides and note itsaudio system
  button position, then remove the decorative19.  The five installation brackets of the original
platesvehicles
6.  The effect after removing right&left20.   Fix the installation brackets to the new
sides decorative plates.navigation system, and make sure the direction is
7.  Switch gear lever to N gear.correct.
8. Pry the decoration on the console with plastic21. Connect all the back wirings&harness of
crow plate,please note each button position.new navigation system
9. Take out the decoration of console by force,22. Install the navigation unit into the vehicle and
then unplug the back wiring harness.fix the four screws
10.  The effect after removing console23.   Install air exit components
decoration components24. Install the air condition box and fix the four
11.  Remove the four screws which are fixed thescrews
air condition box25.   Plug all wiring of console components
12.   Remove air condition box and unplug wiring26.   Install both right and left decorative plates,
harness connectedand note to each button position
13.   The effect after removing air condition box27.
14. Pry the button position of air exit with plastic